The award winning DBK Drymatic system was developed to offer the Damage Management industry a cost-effective tool that would cater for a broad range of drying requirements.
The DBK Drymatic’s unique operation is based upon its continual evaluation of the humidity and temperature of the room to be dried and then operating in the mode that provides maximum drying effect.
When initially switched on, the machine operates in ‘exhaust’ mode, taking the moisture laden air from within the room being dried and purging it from the property. At the same time an equal amount of fresh and pre-heated air is drawn from an unaffected area into the room via the Drymatic.
After a period of one hour, the machine operates in ‘recirculation’ mode, taking air from within the room being dried and continually re-heating it until pre-set temperature and humidity levels have been reached.
Within limits defined by the user, the DBK Drymatic will monitor and adjust the room’s environment, constantly optimising and exchanging the moist air with warm, dry air in a controlled manner to remove odours and ensure a faster, fresher and more efficient drying environment.
Adding controlled heat to the environment speeds up the drying process by promoting evaporation of moisture from the wet structure and contents. Increasing the ambient temperature allows the air to take on a higher water vapour content, which is then purged from the property.
- Can achieve extremely low relative humidity – less than 10%RH
- Controlled ambient temperature up to a maximum of 122F
- Portable and available in 120V and 230V
- No gases or Diesel required.
- kWh metering and drying program memory that does not erase in the event of a power failure.