Drymatic II with Y Piece Kit & Exhaust Kit

Drymatic II with Y Piece Kit & Exhaust Kit

4,995.00 5,625.00

Price on Asking

  • Quiet, intelligent & energy-efficient

  • Can operate as a Positive, Negative, or Balanced Drying System

  • Heat & Air Exchange to optimise drying conditions

  • Excels in Class 4 Specialty Drying situations (e.g. Header Tank Bursts, Flooding, Hardwoods, and Dense Building Materials)

  • Flexible system with a range of attachments

  • 28kg - Rotomoulded and Stackable

  • Save ££ and get the DRYMATIC II with a Y PIECE and EXHAUST ADAPTOR KIT


Interested in buying this special?

CONTACT US

 

Quantity:
Add To Cart

Description

The award winning DBK Drymatic System was developed to offer the Damage Management industry a cost-effective tool that would cater for a broad range of structural drying requirements including floor drying and moisture removal.

This kit includes:

  • DRYMATIC II

  • Y PIECE KIT

  • EXHAUST ADAPTOR KIT

 

DRYMATIC II

  • Quiet, intelligent & energy-efficient

  • Can operate as a Positive, Negative, or Balanced Drying System

  • Heat & Air Exchange to optimise drying conditions

  • Excels in Class 4 Specialty Drying situations

  • Flexible system with a range of attachments

  • Stackable, rotomoulded double skinned housing/body

  • Weight is only 28kgs

  • Portable, plugs into a standard 13 Amp power outlet (no gas or diesel required)

  • Touch-safe heater outlet

  • Quick-fix hose connection

  • Wheels for easy maneuverability

  • Significantly reduces the drying life cycles

Included: 3 x 6m of 150mm Hose; 1 x 6m of 150mm Foil Hose; 4 x rotomoulded screw in connections; 4 x Jubilee clips; and a hose bag

HOW IT WORKS

Recirculation Mode

drymatic II recirculation mode.png

During Re-circulation Mode the Drymatic II takes air in through the Room Intake, measuring Temp and %RH, and then reheats the air to help raise the ambient temperature within the drying chamber.

The drying chamber is continuously heated up until either a user-defined Temperature (C/F) or Relative Humidity (%RH) limit is reached, or until the machine determines that the system needs to make a change based on rates of change within the drying environment.

The Drymatic II uses Re-circulation Mode to maximise temperature gain, whilst minimising heat loss through the Exhaust process.

Exhaust Mode

drymatic II exhaust mode.png

In Exhaust Mode the Drymatic II takes air in from the Room Intake and purges it straight through the machine to outside via the Outside Exhaust - exhausting up to 595m3/hr of air. At the same time the machine takes in replenishment air from an unaffected area (e.g. Outside Air, Air from an Unaffected Space, or Process Air from a HVAC System or Dehumidifier) and heats that air before pushing it in to the drying chamber.

The Drymatic II autonomously cycles between the two modes of operation to maximize the amount of water removed from the area.

THE ADAPTOR KITS

DRYMATIC II Y PIECE ADAPTOR KIT

The Y-piece splitter allows you to direct your airflow into separate chambers from the Drymatic II. This Y-Piece allows you to duct the controlled heated airflow into 2 areas.

INCLUDED Y Piece Adaptor; 3 x 5m of 150mm Hose; 3 x Jubilee Clips; 1 x 150mm to 150mm Joiner; 1 x Carry Bag
 

DRYMATIC II EXHAUST ADAPTOR KIT

The Exhaust adaptor allows the Drymatic II Outside Exhaust duct to be reduced from 150mm to 100mm which allows you to exhaust your Drymatic II into a smaller aperture, such as a letterbox, kitchen extraction fan, or air-vent.

INCLUDED 1 x 150mm to 100mm reducer Adaptor; 2 x Jubilee Clips; 6m of 100mm Hose


The kit


Accessories